Profile problems
I am having issues with my capture one software.
I use a Mac laptop with system 10.6.5 & capture one 5.2.1
My camera system is a Hasselblad H 2 with a Phase one P 45+ back
My problem is that my camera profiles keep changing during shooting. I will set up with outdoor daylight or portrait natural & after a few shots the profile changes by itself to Flash.
Also if I choose Linear response it will change to film standard after a few shots
This is the first time this has happened as I have been using Capture One for 8 years.
Please advise as to how I can fix this problem
Thanks
Franz Marzouca
I use a Mac laptop with system 10.6.5 & capture one 5.2.1
My camera system is a Hasselblad H 2 with a Phase one P 45+ back
My problem is that my camera profiles keep changing during shooting. I will set up with outdoor daylight or portrait natural & after a few shots the profile changes by itself to Flash.
Also if I choose Linear response it will change to film standard after a few shots
This is the first time this has happened as I have been using Capture One for 8 years.
Please advise as to how I can fix this problem
Thanks
Franz Marzouca
0
-
Franz,
It seems creating a support case is a better course of action in your case. Please do so here;
http://www.phaseone.com/en/search/artic ... nguageid=1
There are to many potential variables to speculate on the forum.0
Post is closed for comments.
Comments
1 comment