Copy / apply adjustments to "all" not working

Hello,

I'm experiencing the following issue with CO 10.0.1:

I have a catalog with 527 referenced images.
The images are nearly identical.
I edited the first one and wanted to copy these adjustments and apply them to the images 2 till 527.
So, with the first image selected, I chose : Adjustments => Copy Adjustments
I then selected the images 2 till 527 and chose : Adjustments => Apply Adjustments.
Instead of applying the adjustments to all images, CO only applies the adjustments to image number 2.
According to the online manual (CO 9) this is the correct method to copy/apply adjustments to several images at once.

Has the procedure changed in CO 10?
Or am I doing something wrong?

I already closed and re-opened the catalog and quit and restarted CO 10 but that didn't solve the problem.
I also tried to do the copy / apply adjustments using the "down" and "up" arrow in the toolbar.
This gave the same result (adjustments only applied to first image of the selection).

Best regards,

emeu1

HansB

January 25, 2017 15:00

[quote="HansB" wrote:
Did you enable 'Edit Selected Variants'? (The icon with 3 overlapping rectangles in the top right icon bar, 'Edit' menu, or <SHIFT> + <CMD> +'E')

Regards,
Hans

(viewtopic.php?f=61&t=24616&hilit=edit+selected+variants#p114559)

Regards,
Hans

PS: It's 'Edit All Selected Variants' in the menu.

emeu1

January 25, 2017 15:49

@Hans,

thanks! That solved it.

Best regards,

emeu1

Comments