Canon 5-D tethered - errors with capture
I am trying to shoot tethered with 5-D using a 30-day demo. I am testing it to see if I want to buy it, but I've spent 2+ hours trying to get it to work. I've read the manual, and all the related Forum messages, etc.
– I've already set \"Communications\" to \"PC Connect\" and the camera connects fine. But when I capture I get the following errors codes:
– Capture from Software fires the camera but I get the error code: #0c000005
– Capture from Camera fires fine, Receiving capture bar scrolls across, but then I get an error code: #ffffffdc
– I've tried Version 3.7.4 and 3.7.3, and both do the above. With 3.7.4 I also get a blank screen at \"Camera>Settings\".
I am using a Powerbook G4, Mac OS 10.4.6
Any help would be appreciated.
Thank!
Kirk
– I've already set \"Communications\" to \"PC Connect\" and the camera connects fine. But when I capture I get the following errors codes:
– Capture from Software fires the camera but I get the error code: #0c000005
– Capture from Camera fires fine, Receiving capture bar scrolls across, but then I get an error code: #ffffffdc
– I've tried Version 3.7.4 and 3.7.3, and both do the above. With 3.7.4 I also get a blank screen at \"Camera>Settings\".
I am using a Powerbook G4, Mac OS 10.4.6
Any help would be appreciated.
Thank!
Kirk
0
-
Hello
Please read this knowledge base article:
http://www.phaseone.com/HOME/Content/Su ... 20-%20Main0
Post is closed for comments.
Comments
1 comment