Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Win10 and C1 8.3.2 Color profile problem

Comments

6 comments

  • Utik
    For some reason the forum doesn't show the full width of the image.
    Please click here.
    0
  • SFA
    [quote="Utik" wrote:
    Updated to win10 a couple of days ago but I've got a problem with my display profile, as you will se in my uploaded image it will display correct colors in the thumbnail but not in the main image.
    Already reinstalled, and verified the correct profile in win options.. what now?



    Tricky.

    As far as I am aware Windows 10 is not officially approved for support for Capture One yet.

    Probably best to wait until it is and see what results that brings.

    If the problem persists after the Win 10 approval is available then you could create a support case.

    I assume you have checked that you are not double proofing the image?



    Grant
    0
  • ChrisM
    This is not a windows 10 issue I think. I also installed windows 10, but have no such issue: previews and thumbnails are both correct. I dó have an issue with jpeg's not being color managed quite right after a roundtrip through photoshop: the raw is displayed correctly, the jpeg is displayed correctly, but when viewing the finished jpeg in CO1, it has a color cast in the blue colors.

    Chris
    0
  • Utik
    I did a fresh install today, and cancelled manually old catalog ecc..
    if I watch at images while importing my last pics for a couple of second I can see the correct colors, and then it change to the false one.

    You can see in the images that it apply some sort of default after finishing the preview.

    http://www.utik.net/images/2015/profilo02.jpg

    http://www.utik.net/images/2015/profilo03.jpg
    0
  • ChrisM
    "Proof profile" should not be set to the monitor profile however. The monitor profile is used "behind the scene" by CO1, there is no settings dialogue where you should select your monitor profile. Proof profile should be the output profile of intended use.

    Chris
    0
  • Utik
    I solved the problem, using the legacy control panel I changed the color profile using the one with my calibration.
    But I had to change also the "default" setting for all users, even if I'm using always the same user, probably C1 wasn't reading the correct setting.
    0

Post is closed for comments.