⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

C1 9.2 Conversion Noise

MHK

November 21, 2016 06:12

Just simple conversion from ARW to JPG. When I tried to convert, half of them are noisy just the one on left hand side. Half of them are clean just like on right hand side. Why Do I have this noise?

https://c7.staticflickr.com/6/5792/31005799542_e90edb8660_b.jpg

Comments

6 comments

Christian Gruner

November 21, 2016 12:44
Please update to 9.3.0. If the problem is still there, please contact our Support Team.
0
John Doe

November 21, 2016 15:26
I would also try to export with OpenCL set to Never, just in case.
0
MHK

November 21, 2016 15:40
[quote="John Doe" wrote:
I would also try to export with OpenCL set to Never, just in case.

Without setting anything, I don't see any noise. With any changes such as clarity, exposure, I see that noise.
0
John Doe

November 21, 2016 16:32
Is OpenCL set to Auto or Never?
0
Christian Gruner

November 22, 2016 07:41
Please update to 9.3.0 before trying to set to never. Many bugs are being fixed from release to release. If you still see problems, contact our Support Team, at they can have you try a few more things.

Setting the Hardware Accelleration to Never is a last resort, as it greatly affects performance.
0
MHK

November 22, 2016 17:17
[quote="Christian Gruner" wrote:
Please update to 9.3.0 before trying to set to never. Many bugs are being fixed from release to release. If you still see problems, contact our Support Team, at they can have you try a few more things.

Setting the Hardware Accelleration to Never is a last resort, as it greatly affects performance.

Will try 9.3.
0

Post is closed for comments.