Processed Images Location - How to set to subfolder?
After several years of using C1 on Windows, I have switched to Mac.
One thing I cannot get to work (I can't find the setting) is to output images into a subfolder called Develops.
In Windows, if my project images were in
/project1
/project2
/project3
etc...
then I could configure it so all processed images would be put into a subfolder called Develops...
/project1/Develops
/project2/Develops
/project3/Develops
etc...
In Mac, it appears that I have to manually set the output folder via the "Process Folder" setting each time. Is here a setting like in the Windows versio where you can tell it to always use a subfolder of the raw image folder?
Steve
Steve
One thing I cannot get to work (I can't find the setting) is to output images into a subfolder called Develops.
In Windows, if my project images were in
/project1
/project2
/project3
etc...
then I could configure it so all processed images would be put into a subfolder called Develops...
/project1/Develops
/project2/Develops
/project3/Develops
etc...
In Mac, it appears that I have to manually set the output folder via the "Process Folder" setting each time. Is here a setting like in the Windows versio where you can tell it to always use a subfolder of the raw image folder?
Steve
Steve
0
-
Hi -
Correct - there is no " always process to associated folder " check box for the mac program
So Process folder in Mac can be chosen in the organize tool or file browser.
http://www.phaseone.com/HOME/Content/Su ... 20-%20Main
regards-
JRA
Phase One Technical Support0
Post is closed for comments.
Comments
1 comment