Tethered problems with C14.52

Jimmy Fok

• January 04, 2009 13:54

Found some problems with my Mac Pro Quad when using tethered with 4.52.

1) When the P45+ is connected and turned on, the software will crash when I create a new session.

2) When I connect my Canon 5D via USB with C1 4.52 and after some shots, my mouse and keyboard will 'hang' and not respond. This can only be solved by unplugging and replugging in the USB cable for the mouse and keyboard. This happens often and drives me nuts.

Please help!!!!

0

• 

  James 7

  • January 04, 2009 17:08

  Have you read the knowledge base article on RSIZE bug related to quad core macs?
  
  http://phaseone.com/HOME/Content/Suppor ... 20-%20Main
  
  Not sure about the USB problem though. There is a thread about freezing keyboards here:
  viewtopic.php?f=2&t=6410&p=26241#p26241
  
  .... which is also points to RAM as the culprit.

  0
• 

  Jimmy Fok

  • January 04, 2009 17:19

  The ram is probably the cause for DB capture problems. But I ran a AHT and all seems fine. The USB problem maybe is caused by ram over 2gb too?

  0
• 

  James 7

  • January 04, 2009 17:45

  I think the RSIZE bug is limited to firewire devices. I dont remember seeing any users with USB issues.
  
  Ulf's last post posed that it could be "faulty" RAM modules (freezing keyboard) and that it would be unlikey to be anything with C1.
  
  I'd suggest a trial and error removal of RAM to see if you can eliminate it from the equasion.

  0

Post is closed for comments.