Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

4.7 and Nikon D3

Permanently deleted user
When shootinh tehtered with the Nikon D3 and CO 4.7 on MacPros the symbol for the camera is activ and I can release the camera, but the image will not be shown or transported to the camera. After releasing teh camera the software freezes and when I quit it, it tells there is a capture terminating. Also my Nikon Camera Control Pro then is not abel to release the camera or find it, so I have to do a reboot of the computer.
0

Comments

6 comments

Date Votes
  • Henry1
    Do you mean you tether using Camera Control Pro od do you tether directly to C1 Pro? If it does not works in both cases, you need to check what you have set in the camera for "USB"
    0
  • Permanently deleted user
    I´m trying to thether to CO. Because this does not work I still use CCP. Their it works until I try to use CO not on purpose.
    0
  • Henry1
    Still, you need to check what you have set under "USB".


    You mean it works with CCP and then when you launch CO it stops working? Is that what you mean?
    0
  • Permanently deleted user
    No, It works with CCP. CCP transfers the file to the computer and C0 reads the file automatically (Hot Folder). But CO stops working when I try to release the camera from the button on the surface of CO. It releases the camera but will not transport the file to the computer. And then also CCP quits working, cause their seems top be a shot in progress.

    USB is set on MTP not on Mass Storage
    0
  • Henry1
    Well if you are already using CCP to trigger and files are moving to the hot folder and CO sees them then you should continue to use that. I think by using CO next to trigger, both software may now be in conflict as to which is talking to the camera.

    next thing is, if CCP can trigger the camera, I see no reason why CO cannot in the first place. Did you launch a new session when you first tried using CO to tether? And in that session did you tell CO that you were using tethered?
    0
  • Paul Steunebrink
    [quote="Tilman" wrote:
    No, It works with CCP. CCP transfers the file to the computer and C0 reads the file automatically (Hot Folder). But CO stops working when I try to release the camera from the button on the surface of CO. It releases the camera but will not transport the file to the computer. And then also CCP quits working, cause their seems top be a shot in progress.

    USB is set on MTP not on Mass Storage

    I sounds like the user is having both CCP and CO running at the same time. If that is correct, you have a guarantee to disaster. Choose one to work with and close the other before you start working tethered, i.e. before you connect the camera.
    0

Post is closed for comments.