Capture One 10.2 released!

Jim_DK

• September 13, 2017 13:40

Capture One 10.2 was just released to support our new babies. Also in the release is a slew of new cameras, lenses, bug fixes and improvements to the Capture One experience:

Cameras

• Phase One IQ3 100MP Trichromatic
• Phase One IQ3 100MP Achromatic
• Phase One iXG 100MP Achro
• Phase One iXG 50MP
• Phase One iXU-1000 Achro
• Phase One iXU-RS1000 Achro
• Canon 200D
• Canon 6D mkII
• Canon 77D
• Canon 77D support
• Canon 800D support
• Canon M6 support
• Leica M Monochrome
• Leica M10 (Preliminary)
• Leica M-P
• Nikon D7500
• Nikon D850
• Olympus TG-5

Lenses

• Canon EF 100-400mm f4.5-5.6L IS II USM
• Canon EF 16-35mm f/2.8L III USM
• Canon EF 24-105mm f4-5.6 IS STM
• Canon EF-S 15-85mm f/3.5-5.6 IS USM
• Canon EF-S 24mm f2.8 STM
• Leica Elmar-M 24mm f/3.8 ASPH
• Leica Summilux-M 21mm f1.4 ASPH
• Leica Summilux-M 24mm f/1.4 ASPH
• Leica Super-Elmar-M 18mm f3.8 ASPH
• Leica Super-Elmar-M 21mm f/3.4 ASPH
• Leica Tri-Elmar-M 16-18-21mm f/4 ASPH
• Panasonic Leica DG Summilux 12mm f/1.4 ASPH (H-X012)
• Panasonic Leica DG Vario-Elmarit 8-18mm f/2.8-4 ASPH (H-E08018)
• Panasonic LUMIX G Leica DG Nocticron 42.5mm f/1.2 ASPH Power OIS (H-NS043)
• Panasonic Lumix G Vario 100-300mm f/4-5.6 II POWER O.I.S. (H-FSA1003004A)
• Panasonic Lumix G Vario 45-200mm f/4-5.6 II POWER O.I.S. (H-FSA45200)
• Pentax DA 18-50mm f4-5.6 DC WR RE
• Sony E 18–200 mm F3.5–6.3 OSS LE (SEL18200LE)
• Sony FE 12-24mm f4 G (SEL1224G)
• Sony FE 16-35mm f2.8 GM (SEL1635GM)
• Sony Vario-Sonnar T DT 16–80 mm F3.5-4.5 ZA (SAL1680Z)

Get the full release notes here https://www.phaseone.com/en/Download.aspx

0

• 

  Permanently deleted user

  • September 13, 2017 16:23

  Thanks Jim for the good news, and most particularly for the Leica cameras owners, as the M10 is now supported.
  
  But I wonder what is the difference between the supports for M(240) and M-P (now supported), that I own, as the sensors are exactly the same. I don't want to put a case for this, but I would be interested in any answer.....
  
  Thanks to the Phase One team in advance !!

  0
• 

  David Braun

  • September 13, 2017 17:27

  Very dissapointed no new Nikon lens support, I had requested Nikon 18 - 140 earlier this year. Now that C1 sells to more than just high end pros P1 needs to widen it's support.

  0
• 

  emeu1

  • September 13, 2017 18:26

  Hello,
  
  just curious: why does the "Capture One 10" => "Check for Updates..." option say:
  
  "Your software is up to date."
  
  where CO 10.2 is already (for several hours) available? (I'm on 10.1.2 (Build 10.1.2.26)).
  Reason I'm asking is that I do not actively check the PhaseOne website for updates and do not always read the PhaseOne mailings. I rely on the "Check for Updates..." option.
  
  Best regards,
  
  Erik

  0
• 

  John Doe

  • September 13, 2017 18:39

  It will be available shortly, probably within the next 24/48 hrs. As usual.

  0
• 

  Frans Driesen

  • September 13, 2017 18:56

  Did the 10.2 download and install.. It seems that I have a faster response in the adjustments with my Tangent Element Kb panel..So far no spinning beach ball...(knock on wood)

  0
• 

  Permanently deleted user

  • September 14, 2017 18:41

  Disappointing - some new hardware but not new features. 10.0 had only a few new features for the average users and severe performance issues. A first test shows performance improvements compared to 10.0 and 10.1 but still slower than V9.

  0
• 

  Permanently deleted user

  • September 15, 2017 09:14

  [quote="tenmangu81" wrote:
  
  But I wonder what is the difference between the supports for M(240) and M-P (now supported), that I own, as the sensors are exactly the same. I don't want to put a case for this, but I would be interested in any answer.....
  

  
  
  Edit : Sorry. The M-P appears indeed separately from the M (Typ 240) in the release note, but not in the software itself.

  0
• 

  Eric Nepean

  • September 15, 2017 13:21

  Support for new cameras - great!
  
  But support for Panasonic cameras is still broken.
  
  Foor jps from a panasonic camera, COP does not show the lens name or type, only the working focal length and aperture; this is quite useless for a zoom.
  
  This has been broken for a long time.

  0
• 

  NN114992

  • September 17, 2017 05:30

  is so difficult to obtain the use of panasonic fz300 raw files?

  0
• 

  emeu1

  • September 17, 2017 08:01

  Hello,
  
  just tried again but CO still says there is no update available (I'm still on 10.1.2).
  
  Choosing menu: Capture One => Check for Updates ...,
  results in: Your software is up to date.
  
  Choosing menu: Capture One => Preferences...,
  then tab "Update" and clicking button [Check For Updates],
  results in: no indication in the Download column and a message at the bottom of the screen:
  "Last successful check: 17 September 2017 at 09:55"
  
  Wonder if others have the same issue?
  I'm on CO Pro 10.1.2, Build 10.1.2.26 and macOS Sierra Version 10.12.6
  
  Best regards,
  
  Erik

  0
• 

  ghaliburton

  • September 17, 2017 08:44

  Having the same issue. Check for updates shows 10.1.2 and still shows no update available.

  0
• 

  John Doe

  • September 17, 2017 08:48

  Download it directly from the web site if you can't wait.

  0
• 

  ghaliburton

  • September 17, 2017 09:44

  Good to know it's just a timing issue, thanks.

  0
• 

  photo by FA

  • September 19, 2017 16:41

  Hi,
  
  Can somebody tell me, what a preliminary support means for Leica M10 camera (preferably somebody from PO team)
  
  Many thanks,
  
  Fatih

  0
• 

  SFA

  • September 19, 2017 20:35

  [quote="fatihayoglu" wrote:
  Hi,
  
  Can somebody tell me, what a preliminary support means for Leica M10 camera (preferably somebody from PO team)
  
  Many thanks,
  
  Fatih

  
  
  Does this help?
  
  viewtopic.php?f=68&t=26632#p125112

  0
• 

  photo by FA

  • September 19, 2017 21:55

  I didn't have that particular problem but on Leica forums there are some comments about the camera profile is a carbon copy of M240. Obviously they are both different cameras but somehow color profiles are exactly the same. So I want to understand what is missing from the support, i.e. is the profile the definite one, has noise reduction algorithm optimized for this camera, etc.
  
  Cheers,
  
  Fatih

  0
• 

  JoeLeads

  • September 22, 2017 08:58

  Thanks for the new release!
  
  Question: What about the macOS High Sierra release on Monday? Is CO 10.2 expected to work with the new OS, or do you see any major issues?

  0
• 

  NNN635158767546269381

  • September 26, 2017 09:50

  This is very good. They should fix and optimised first! 😜
  
  

  [quote="FL" wrote:
  Disappointing - some new hardware but not new features. 10.0 had only a few new features for the average users and severe performance issues. A first test shows performance improvements compared to 10.0 and 10.1 but still slower than V9.

  0
• 

  Benjamin Hayon

  • September 29, 2017 01:27

  I just updated to 10.2 earlier and now I can't edit any sessions, can anyone help mw with this problem?
  
  Im getting the pen with the red line on the thumbnails

  0
• 

  Christer Almqvist

  • October 03, 2017 09:03

  I have updated to 10.2 and have had no problems. I find it noticeably faster with my Sony 42MB RAW files.

  0
• 

  Ian Wilson

  Moderator

  • October 03, 2017 09:39

  

  [quote="NN635074352013797120UL" wrote:
  I just updated to 10.2 earlier and now I can't edit any sessions, can anyone help mw with this problem?
  
  Im getting the pen with the red line on the thumbnails

  
  You could check whether you are on the right licence (not for instance the DB licence that is only for Phase One cameras, or the Sony licence that is only for Sony cameras). Could it somehow have got changed during the upgrade? Look at Licence... on the Capture One menu.
  
  Ian

  0
• 

  DJ

  • October 15, 2017 14:24

  I've just updated from 10.1.1 to 10.2 and Capture One crashes every time I change capture folder ☹️
  
  Tried complete uninstall, then reinstall multiple times but no avail. I'm using Mac 10.11.6 El Capitan.
  
  Has anyone else have problems?

  0
• 

  Ian Wilson

  Moderator

  • October 17, 2017 18:47

  

  [quote="NN634969607133502601UL" wrote:
  I've just updated from 10.1.1 to 10.2 and Capture One crashes every time I change capture folder ☹️
  
  Tried complete uninstall, then reinstall multiple times but no avail. I'm using Mac 10.11.6 El Capitan.
  
  Has anyone else have problems?

  
  Have you tried submitting a support case? The Phase One support team may be able to help you solve this.
  
  Ian

  0
• 

  Andrew Filipowicz

  • October 22, 2017 15:05

  Could anybody point me to the pricing for an upgrade from 9 to 10.2? When I check for updates in the software it only states: depending on your license, you may have to pay for this update. Does not say how much and then there is a button marked LETS GO!
  
  Don´t want to upgrade before I can see a price.
  Thanks
  Andrew

  0
• 

  Ian Wilson

  Moderator

  • October 22, 2017 15:14

  

  Details are here.
  
  99 dollars or euros. Depending on your location you may be charged VAT on top.
  
  Ian

  0
• 

  Andrew Filipowicz

  • October 22, 2017 15:20

  Thanks Ian! I could not find that but thank you for showing me!

  0
• 

  NN634818328655440597UL

  • October 25, 2017 07:48

  Once again I tried to use CaptureOne on my iMac 27 5K and once again I'm disapointed. Its too slow for working. I don't know why you are not able to speed up viewing/rendering as there is software on the market where it works. Lightroom does the job massiv better - sadly to say 😭
  Maybe you could get help to improve you program skill at this company. There viewer called "Apollo One" is amazing fast - no it is insane fast. You can view RAW files without any delay even when you zoom and scroll through tons of files!
  http://anogeissus.com/products/apollo-one
  
  I would love to use Capture One - its the best out there

  0
• 

  Ian Wilson

  Moderator

  • October 25, 2017 08:28

  

  [quote="NN634818328655440597UL" wrote:
  Once again I tried to use CaptureOne on my iMac 27 5K and once again I'm disapointed. Its too slow for working. I don't know why you are not able to speed up viewing/rendering as there is software on the market where it works. Lightroom does the job massiv better - sadly to say 😭
  Maybe you could get help to improve you program skill at this company. There viewer called "Apollo One" is amazing fast - no it is insane fast. You can view RAW files without any delay even when you zoom and scroll through tons of files!
  http://anogeissus.com/products/apollo-one
  
  I would love to use Capture One - its the best out there

  
  So back to the question I asked you last week - have you tried submitting a support case?
  
  Ian

  0

Post is closed for comments.