Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Suggestions for fixing neon colors with color editor

Comments

5 comments

  • SFA
    I had a a shot of a car recently that was black/carbon fibre dark grey but with bright reflective orange stripes. The colour range in the Orange was most of yellow and red. Flash lit too - so very stand out.

    Starting with a RAW file with a Linear curve made life a little easier. You may already have done that.

    The "orange" colour range was so broad that a colour based mask was not a huge benefit (the colours were widely represented in the greys of the image) though it worked well enough selecting the colour. In the end I used a local painted mask for isolation for this particular shot.

    HTH.


    Grant
    0
  • Tom Dunkes
    Hmm didn't try the linear curve--thats a good idea. With some colors we will drop exposure by 2/3 and have editors comp the file in post. Trying to hit the colors on one exposure and one output file. Anyone else have other suggestions?
    0
  • SFA
    [quote="tdunk" wrote:
    Hmm didn't try the linear curve--thats a good idea. With some colors we will drop exposure by 2/3 and have editors comp the file in post. Trying to hit the colors on one exposure and one output file. Anyone else have other suggestions?


    I would suggest trying V9 if you have not already done so. See it is gives you a little more leeway and additional options = Luma curve for example.

    Grant
    0
  • Tom Dunkes
    Thanks Grant, 9 would be great but it is not my personal copy.
    0
  • SFA
    [quote="tdunk" wrote:
    Thanks Grant, 9 would be great but it is not my personal copy.


    Ok, but you could still use the trial perhaps to check for possible benefits?


    Grant
    0

Post is closed for comments.