camera controls greyed out when tethering with p45+

markc78

• February 14, 2015 01:11

as seen in the screen grab , p45+ is recognised but the camera controls panel can't be used as is the case in live view

advice would be appreciated ....

https://dl.dropboxusercontent.com/u/607 ... .43.45.jpg

0

• 

  Grant Hodgeon

  • February 14, 2015 03:47

  What body are you using?

  0
• 

  Edward Caruso

  • February 14, 2015 04:07

  I know using certain Hasselblad bodies there is no communication/camera control.
  Recently rented a H4x and an IQ250 and had no control from the computer.

  0
• 

  markc78

  • February 14, 2015 11:17

  phase one 645df & P1 120 af lens , should all get along, have checked preferences & selected this as the body configuration as well
  
  ??

  0
• 

  brianmerwin

  • February 16, 2015 01:08

  Hi Mark,
  
  I'm almost positive you should be able to have access to those camera control settings for the 645DF Body.
  
  You might have issues with a firmware mismatch, or power issues, or cable issues.
  
  Best bet is honestly to open a support case (or contact your dealer) to escalate the issue.
  
  

  0
• 

  markc78

  • February 16, 2015 18:51

  Thanks for that link & advice Brian.
  It should all work & the superior live viewing tools of capture one is one of the main reasons I've recently moved to a P1 system from Hasselblad. I have come across some troubleshooting tips along the lines of deleting some of the Capture One preference & cache files which I'll try when I return next week.
  If that doesn't work then I'll try re-installing C1. If either of these work then I'll update this post for the record.
  Failing that then I'll dig deeper & raise a ticket which hopefully I won't have to do.
  
  Cheers
  Mark

  0
• 

  Jim_DK

  • February 16, 2015 19:00

  P45+ has no interface board and therefore no interface to camera controls.
  
  Backs with this board are P40+ P65+ and all IQ1/2.
  
  *Edit: in combination with the Phase One Camera system.

  0
• 

  markc78

  • February 17, 2015 13:08

  [quote="Jim_DK" wrote:
  P45+ has no interface board and therefore no interface to camera controls.
  
  Backs with this board are P40+ P65+ and all IQ1/2.
  
  *Edit: in combination with the Phase One Camera system.

  
  
  Thanks for the info Jim, not really what I wanted to hear. So I assume this means I can't use the live view focussing controls either ? Really surprising as even my old H3D39 had this in Phocus & this P45+ in combo with C1 should be a far more improved system & I never thought for a moment that it would lack this.

  0

Post is closed for comments.