Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

CaptureOne 5 pro trial ver.

NN190285UL
I just download the trial version of Capture One 5 pro and have installed it. The software did not recognize my camera which is a Nikon D200!
Pls help. THX!
0

Comments

5 comments

Date Votes
  • Paul Steunebrink
    I assume you refer to tethered shooting, with the camera connected to the computer and operating from Capture One.
    Can you check/confirm that you run in Pro mode, not DB (when you start the trial, you have to select which mode you want to run) or look in the Help, About menu.
    0
  • NN190285UL
    Thank you for your reply.
    I click Help then About, I pop up a windows, that says CaptureOne Pro 5.0.2 Trial.
    I use a Nikon D200
    0
  • Paul Steunebrink
    OK, next: with your camera connected and switched on, is it recognized by the computer (Device Manager). And if any Nikon software is running, kill it before you start Capture One.
    What Windows are you running and is it perhaps 64-bit?

    Try to give some information about your setup. It really helps helping.
    0
  • NN190285UL
    Hi Paul,

    My computer did recognize the camera when I plug it in but the CaptureOne 5 Pro says No Camera Attached!
    I am using Windows 7 64 bits.

    Thank you!
    0
  • Paul Steunebrink
    Having a 64-bit setup could be the culprit. Best to ask Phase One in a support case which you can open from their web site. Some DSLR cameras which are supported according to release notes work tethered within Windows 64-bit (my Canon 5D mkII is an example; but I have seen reports from Nikon D700 as well). Maybe it is a communication setting on the camera; not a Nikon user myself.

    Maybe any Nikon users here?
    0

Post is closed for comments.