Base Characteristics
I imported a file of app 1700 CR2 files to a catalogue. They were all from a Canoon 5D3. 9 of the pictures, randomly within the catalogue, show the triangular warning sign and have no base characteristics attached to them. I would like to delete these 'spoilt' image files and replace them from back-up. I get 'failed to delete image'. Any suggestions as to what I can do. Help much appreciated.
Since the first post an hour or so ago, I have been looking more closely at the problem. I noticed that some pictures had what looked like a green filter in front of them and found there was no Base Characteristic. They could be adjusted normally but the Levels command would not work. I then created a variant. Full editing back to normal - including noting the base characteristic - 5D3 was listed. However - Even with demotion/promotion, the original cannot be deleted.
Any help/comment would be good.
Since the first post an hour or so ago, I have been looking more closely at the problem. I noticed that some pictures had what looked like a green filter in front of them and found there was no Base Characteristic. They could be adjusted normally but the Levels command would not work. I then created a variant. Full editing back to normal - including noting the base characteristic - 5D3 was listed. However - Even with demotion/promotion, the original cannot be deleted.
Any help/comment would be good.
0
Post is closed for comments.
Comments
0 comments