Auto Rotate - doesn´t work
So I`m shooting tethered with an Credo 60 and 80 ( both on FW 3.003 ) to Macs with CO 8.0.2.
There is Auto rotate activated on the backs and in the software.
The Alpa hangs on the tripod ( flipped 180° ).
The image shows correctly ( aka turned 180° ) on the backs screen.
CO show the image ALWAYS heads down.
Even with " Show 180° turned " selected in CO menu does not help. Nor does 90° changes anything.
Am I too studpid to handle the setup ?
Worried & puzzled - Steffen
There is Auto rotate activated on the backs and in the software.
The Alpa hangs on the tripod ( flipped 180° ).
The image shows correctly ( aka turned 180° ) on the backs screen.
CO show the image ALWAYS heads down.
Even with " Show 180° turned " selected in CO menu does not help. Nor does 90° changes anything.
Am I too studpid to handle the setup ?
Worried & puzzled - Steffen
0
-
Perhaps you have the Auto Rotate setting for incoming images turned on, in addition to the 180° rotate. Thus negating the setting. Maybe?
Next Capture Adjustments -> Auto Alignment (checked off)0
Post is closed for comments.
Comments
1 comment