Error 300#4. Windows 7 + C1 6.3.2 + tethered P45+
Would really appreciate it if someone could shed some light on the following error:
Detail:(300#4) LightPhase camera error: The camera did not complete a request within the expected time. - Download command timed-out (10632 ms) in WaitAsyncBuffer. Block 1 of 10 (64512 bytes).
Using a P45+, on a Windows 7 x64 laptop with C1 6.3.2. The DB installs perfectly in Windows, C1 looks like it's about to recognise it (firewire connection becomes visible on the DB) but then the above error message appears. I'm using a 6 pin -> 4 pin firewire cable, and set the back to battery power in the hope that the lack of a powered port on the laptop wouldn't cause any problems...but perhaps it is?
Cheers.
Detail:(300#4) LightPhase camera error: The camera did not complete a request within the expected time. - Download command timed-out (10632 ms) in WaitAsyncBuffer. Block 1 of 10 (64512 bytes).
Using a P45+, on a Windows 7 x64 laptop with C1 6.3.2. The DB installs perfectly in Windows, C1 looks like it's about to recognise it (firewire connection becomes visible on the DB) but then the above error message appears. I'm using a 6 pin -> 4 pin firewire cable, and set the back to battery power in the hope that the lack of a powered port on the laptop wouldn't cause any problems...but perhaps it is?
Cheers.
0
Post is closed for comments.
Comments
0 comments