Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

D2x Previews Soft

Comments

3 comments

  • jrgeoffrion
    Anyone?
    0
  • Anonymous
    jrgeoffrion,

    This is the first we've been asked about this issue. We talked about what you may be seeing and we believe it is due to the pixels being smaller on the CMOS chip of the D2x. It is this microscopic technology on today's sensors that is likely the reason your Preview images appear soft. As you noted, using the Focus Tool truly tells the tale regarding Sharpness, and this tool is where you should put your faith rather than a Preview.

    Eric Michelson of US Support offers these thoughts:

    If D2X has more megapixels in the same area that means that the pixels are smaller and might be beyond the resolution of the lens to image.
    As pixels get smaller the lens just cannot focus a point of light small enough to cover a single micron. It may cover several pixels but all those pixels imaging the same little point of light create a soft image. It can vary with the lens, and it can vary with fstop of the same lens
    Lenses have one fstop around which they are sharpest.


    Eric seems to be right-on-the-bullseye, See DPReview for a visual: http://www.dpreview.com/reviews/nikond2x/


    Sincerely,

    k c
    0
  • jrgeoffrion
    Keith,

    Thanks for your reply. However, it has nothing to do with the chip of pixel size. It has to do with the sharpening algorythm applied to the CaptureOne previews. It appears that the sharpening is not \"as strong\" of with the other camera models.

    Send me an e-mail at jr [at] jrgeoffrion [dot] com and I'll e-mail you a screen grab to show you.

    No matter the origin, a scaled down / resized image should ALWAYS be sharp if the original is sharp. The opposite is not true however.
    0

Post is closed for comments.