Skip to main content

⚠ī¸ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠ī¸

Images won't process

NNN634654571002732387
I've completed my adjustments and when I choose "process", the files are outputting at between 10-200kb (TIFF files), no idea why...they're set for full resolution.
0

Comments

10 comments

Date Votes
  • Steinar12
    Double check if the correct output recipe is active?
    0
  • Paul Steunebrink
    Try this:
    - delete the batch history
    - create a new process recipe ("Tiff CO7" for example)
    and try again.

    I have seen more reports on this here.
    0
  • NNN634654571002732387
    Paul,

    I'm trying to export a single image, not batch. Where would I find the history to delete? Thanks!

    -D
    0
  • NN634756744767534272UL
    even single images are handle as a batch (just a small one 😄 )there is a "tool tab" called "batch" which has a sub tab "history". you can select histories there and review or delete them.

    FYI - I thought this was happening to me the other day but it turns out that the images were being put in a place that was not where I had specified. So I searched my drive and found them. Deleted the recipe and made a new one and all was well.
    0
  • NNN634654571002732387
    Thanks! Tried that, same problem though ☚ī¸
    0
  • Jamie Roberts
    Same problem for me. C1 7 randomly skips images in a batch job, and reports that they cannot be processed.

    However, individually, they all process 😐 . This affects roughly 1/3 to 1/2 of files submitted, at random, seemingly, and it happens whether or not OpenCL is on or not. I have lots of RAM, and an Nvidia GTX680 card with the most recent driver (C1 v7 wouldn't even open without that) so that's not the issue.

    Anyone have any suggestions?
    0
  • Robert Frith
    Adding the Batch tool (View/Add Tool to Output Tab/Batch) solved this problem for me... C1 7.0.1
    0
  • Drew Altdo
    [quote="Robert71" wrote:
    Adding the Batch tool (View/Add Tool to Output Tab/Batch) solved this problem for me... C1 7.0.1


    Please update to 7.1.2.
    http://www.phaseone.com/en/Downloads/Ca ... Pro-7.aspx
    0
  • Rogan Coles
    Hmm, didn't realise that this seems to be an ongoing problem 🙄

    Have just updated/upgraded to 7.1.2. In looking to process a bunch of images, did my usual hold down the Ctrl key and selected the RAW (CR2) files I want to process - as in converting them to 8-bit TIFFs. After making the selection, hit the Process button and, up until now, this has usually worked - as in processing the selected batch of images. With 7.1.2 this no longer seems to be the case - only the first image in the selection goes through.

    I've followed up on some of the suggestions offered here - as in clearing history. Nothing seems to clear this issue.

    The question being asked here is this, is anyone else here experiencing the same issue?

    I'm using 7.1.2 on a Wintel machine using Win 7 Pro 64-bit.
    0
  • Drew Altdo
    [quote="tingyat" wrote:
    ... With 7.1.2 this no longer seems to be the case - only the first image in the selection goes through.


    Please turn on the "Edit Selected Variants" feature.
    0

Post is closed for comments.