Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

No fuji film simulation support for XE-2 ?

turborunner
I am trying out Capture One Pro 12.

I tried to get the fuji film simulations for a XE-2 raf file. But on the curve box in the Base Characteristics, I only get a choice between Film Extra Shadow, Film High Contrast and Film Standard.
For a XT-3 raf file I get all fuji film simulations.

Does this mean that the film simulations are not implemented for the XE-2 or XT-1 ?
0

Comments

4 comments

Date Votes
  • dee jjjaaaa
    [quote="turborunner" wrote:
    I am trying out Capture One Pro 12.

    I tried to get the fuji film simulations for a XE-2 raf file. But on the curve box in the Base Characteristics, I only get a choice between Film Extra Shadow, Film High Contrast and Film Standard.
    For a XT-3 raf file I get all fuji film simulations.

    Does this mean that the film simulations are not implemented for the XE-2 or XT-1 ?


    a quick look @ P1X files in "curves" catalog (apparently additional LUTs usage of which is invoked by selecting a proper curve in UI) for Fuji shows that PhaseOne only did this for 3 sensors: X-T3 (26mp), X-H1 (24mp), GFX50S (50mp)... all other supported models are using either of these 3 base P1X type of files .. 16mp sensors are not present... so X-T2 for example will be using P1X LUTs developed for X-H1
    0
  • SFA
    [quote="turborunner" wrote:
    I am trying out Capture One Pro 12.

    I tried to get the fuji film simulations for a XE-2 raf file. But on the curve box in the Base Characteristics, I only get a choice between Film Extra Shadow, Film High Contrast and Film Standard.
    For a XT-3 raf file I get all fuji film simulations.

    Does this mean that the film simulations are not implemented for the XE-2 or XT-1 ?


    If it helps there is at least one other quite comprehensive and active thread running on this subject with all sorts of information you may find useful.

    Also the Release notes for V12 list what is available at this time.

    Catching up with both sources may be helpful to you.

    HTH

    Grant
    0
  • turborunner
    Thanks, I did some catching up 😊
    Interesting to know that PhaseOne seems to be dependent on Fuji for the implementation of the film simulations.

    I also discovered that it is not possible to apply the X-T3 or X-H1 film simulations on a X-E2 picture. Even if you change the camera designation in the Exif data to X-T2 or X-T3.
    0
  • turborunner
    [quote="deejjjaaaa" wrote:

    a quick look @ P1X files in "curves" catalog (apparently additional LUTs usage of which is invoked by selecting a proper curve in UI) for Fuji shows that PhaseOne only did this for 3 sensors: X-T3 (26mp), X-H1 (24mp), GFX50S (50mp)... all other supported models are using either of these 3 base P1X type of files .. 16mp sensors are not present... so X-T2 for example will be using P1X LUTs developed for X-H1


    Please, can you tell me where I do find the "curves" catalog and if possible the LUTs
    0

Post is closed for comments.