Nikon Lens profile in 11.x
I purchased Capture One 10 but I keep working on the Lightroom 6 for most of my works. After a year of practicing on the purchased Capture One 10.x, I felt quite confident now to transfer work to capture one from Lightroom 6. However, there are couple lens that I used often are not in Capture One 10.x. Before I paid to upgrade my 10.x to 11.x, can anyone tell me if they are supported in 11.x? The lens are the Nikon AF-S 28mm/f1.4E ED and AF-S 300mm/f4E PF VR. Thanks.
0
-
They seem to support the 28mm 1.8, and the 24mm 1.4, but not the 28mm 1.4. It seems to be a comparatively new lens (introduced in the last 6 months or so?) so it may be that support for it will come in time. Phase One generally support lenses where (a) there is a demand for it which they partly gauge by how many users request support in a support case, and (b) whether their own testing of the lens shows aberrations etc that need correction.
So you could put in a request in a support case. And are you in fact seeing distortions and aberrations that need correction?
The 300mm is also not supported although it has been around for longer. However I note that Ken Rockwell says in his review of it hereThe Nikon 300mm f/4 VR PF has no visible distortion at any distance.
so it may be that you don't really need it to be specifically supported. Do you in fact see problems with it?
Ian0 -
All currently supported lenses are listed in the release notes.
Available from here.
https://www.phaseone.com/download
HTH.
Grant0 -
Thanks. Those lens are very good in terms of distortion especially the telephoto lens. However, the light fall off is somewhat quite significant. One advantage of staying with lightroom is that the lens is updated quite regularly. I will submit a support case to see if they are working on them in 11.x 0 -
[quote="SFA" wrote:
All currently supported lenses are listed in the release notes.
Available from here.
https://www.phaseone.com/download
HTH.
Grant
I can only find the supported camera list but there is no supported lens list...0 -
[quote="Johan_h" wrote:
[quote="SFA" wrote:
All currently supported lenses are listed in the release notes.
Available from here.
https://www.phaseone.com/download
HTH.
Grant
I can only find the supported camera list but there is no supported lens list...
Look harder, starting from page 30.0 -
Thanks, indeed found them in the release note. They are still not supported. I have filed support case to see if they are in the plan to do so. 0 -
[quote="Johan_h" wrote:
Thanks, indeed found them in the release note. They are still not supported. I have filed support case to see if they are in the plan to do so.
Phase traditionally do not pre-announce any sort of developments.
Your requests will, however, be added to the count of requests for each lens and the level of interest recorded for each lens (or indeed any other sort of development you might at some point propose to them) and helps them to prioritise the order in which the assessments might be done.
Or you could consider creating an LCC profile within C1.
HTH.
Grant0 -
Some colleagues and me have requested the lens profile for the Nikon 28mm 1.4 ages ago (Mac and Windows) and it is still not implemented, more than a year after it's release. I find this really disappointing of Phase One, it is a wide angle lens, one of Nikon's best and could nevertheless do with some slight correction. LR and ACR had it implemented basically from when it came out, so whenever I use this lens I have to resort to their software. 0
Post is closed for comments.
Comments
8 comments