Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

High Dynamic Range banding issue

peter yip
Hi

I have notice this issue today while working on a set of images recently taken.

sometimes when I push the slider of either highlight or shadow recovery, a portion of the image does not get affected.

http://s18.postimg.org/6somcm5eh/Screen_Shot_2015_03_24_at_19_01_43.png

any helps?

regards
Peter
0

Comments

7 comments

Date Votes
  • Christian Gruner
    Please create a Support case right away. Remember to include your logs, and, if possible, the raw file + its adjustments.
    0
  • ChrisM
    [quote="PeterYipPhotography" wrote:
    Hi

    I have notice this issue today while working on a set of images recently taken.

    sometimes when I push the slider of either highlight or shadow recovery, a portion of the image does not get affected.

    http://s18.postimg.org/6somcm5eh/Screen_Shot_2015_03_24_at_19_01_43.png

    any helps?

    regards
    Peter

    This looks familiar!
    I have the same issue quite regularly with images in a catalogue. Only (elaborate) way to solve it, is to export the image (including settings) to a location outside the catalogue, then trash the image (removing it from the catalogue) and import it again.
    I'm not sure what triggers this issue, whether it is use of layers, or other edits, but once it is there, even resetting the image does not cure the odd shadow tool behavior.

    Chris
    0
  • meanwhile
    Do you have any sidecar files from other apps? I noticed a similar thing when I was testing out Irident Developer. Deleting the sidecar file fixed the issue.
    0
  • peter yip
    Christian Gruner

    Please create a Support case right away. Remember to include your logs, and, if possible, the raw file + its adjustments.


    Christian, many thanks will do so

    This looks familiar!
    I have the same issue quite regularly with images in a catalogue. Only (elaborate) way to solve it, is to export the image (including settings) to a location outside the catalogue, then trash the image (removing it from the catalogue) and import it again.
    I'm not sure what triggers this issue, whether it is use of layers, or other edits, but once it is there, even resetting the image does not cure the odd shadow tool behavior.

    Chris


    Many thanks for the suggestion Chris, I mainly work only with session but will give it a go and see if it can be a temporary solution 😊

    Do you have any sidecar files from other apps? I noticed a similar thing when I was testing out Irident Developer. Deleting the sidecar file fixed the issue.


    No sidecar files.
    0
  • LSdigi.com
    [quote="PeterYipPhotography" wrote:
    Christian Gruner

    Please create a Support case right away. Remember to include your logs, and, if possible, the raw file + its adjustments.


    Christian, many thanks will do so

    This looks familiar!
    I have the same issue quite regularly with images in a catalogue. Only (elaborate) way to solve it, is to export the image (including settings) to a location outside the catalogue, then trash the image (removing it from the catalogue) and import it again.
    I'm not sure what triggers this issue, whether it is use of layers, or other edits, but once it is there, even resetting the image does not cure the odd shadow tool behavior.

    Chris


    Many thanks for the suggestion Chris, I mainly work only with session but will give it a go and see if it can be a temporary solution 😊

    Do you have any sidecar files from other apps? I noticed a similar thing when I was testing out Irident Developer. Deleting the sidecar file fixed the issue.


    No sidecar files.


    Hey Peter!

    Hope you're well! Have you tried exporting those files to see if they're affected? Also try regenerating previews, and updating to new 8.2 version. Were they shot on your P25?
    0
  • peter yip
    Hey Peter!

    Hope you're well! Have you tried exporting those files to see if they're affected? Also try regenerating previews, and updating to new 8.2 version. Were they shot on your P25?



    Hey there !

    not tried export / regenerating previews yet. will give it a go later today.
    tried it on both 8.1 and 8.2 and had the same issue, and yes P25+

    I will give you a shout later
    0
  • peter yip
    Tell you what, I re-open the session again today and the problem just seems to disappear itself ....
    0

Post is closed for comments.