Canon Mark II 1Ds Pyschadelic Image Issue

NN8926212

• September 16, 2006 02:35

I am shooting with a Canon Mark II 1Ds with current firmware version 1.1.4 and using an older dual 2.5ghz PowerPC G5 with operating system version 10.4.7 and I have been having this happen on more than one occasion and I tried to bring the file into the capture folder again from the memory card and it is still corrupt. I am not sure if this is a memory card issue...it is a Lexar 133x 2gig SD card that I just purchased and may be the culprit. I believe it happened with other cards too so am not sure since it happened on multiple cards from what I can recall. I uploaded a sample image on my server for you to see what the thumbnail looked like came through when processing the image. Any input or thoughts is appreciated. Thanks. Anthony

http://www.atortdesign.com/phaseone/ImageIssue.jpg

The metadata is attatched if that is of any help.

0

• 

  NN8926212

  • September 18, 2006 03:03

  No suggestions?

  0
• 

  Anonymous

  • September 18, 2006 16:08

  Anthony,
  
  If images are transferred direct from card to 1 machine and no other program is used, I suspect you have a RAM issue here.
  Have you recently added any RAM?
  If so, remove or change slots and check results.
  
  If you shoot tethered, are images corrupted?
  If you put images on another machine, are they still corrupted?
  
  Regards,
  k c

  0
• 

  NN8926212

  • September 18, 2006 16:34

  I do not think it has anything to do with my RAM. I have the original 4 gigs that came with the machine and have not done anything to it. The only thing that has been added was a SATA card for an external 5 bay drive.
  
  I have not tried to bring the image on another machine, but I can try and see if they are corrupted. I do shoot tethered with my MacPro, but do not recall having any major issues. It very possibly may have had a similar thing happen while shooting tethered because I have had this issue come up before this particular case and know that I saw it before.
  
  I am really not sure what to do....could trashing any folders, etc. do anything that may help or try to trash everything and start a new session?
  
  Thanks and let me know. @

  0
• 

  Eric211

  • October 02, 2006 00:11

  Never really figured out what it was. But my greatest supicions were WIFI.
  Happened everytime I was shooting and dowloading near or in a building with heavy WIFI.
  I had it happen shootingh tethered and to the cards and yes they were seen the same way on other computers. Although never corrupt.
  I really feel it was some how WIFI, but I also had RAM freshly installed..:+}
  *EK 🙄

  0

Post is closed for comments.