Sharpening and Noise Setting for Fuji X-Trans Sensor
I am new to Capture One having first used it as part of the beta for 7.0.2. I am quite pleased with the improvement in RAW processing for my Fuji X-E1 but I am still struggling with making the best use of the Sharpening and Noise Reduction functions, and I would welcome some advice on optimizing their use.
I seems to get my best results (depending on subject matter) in the following range:
Amount = 240
Radius = 0.8
Threshold = 1.0
Luminance = 0
Color = 0
Details = 0
Sometimes I push Details to 10-15 for a little more content but it seems to introduce artifacts rather quickly with this sensor.
If you are an X-Trans sensor user, what adjustments do you find helpful and why?
Jeff
I seems to get my best results (depending on subject matter) in the following range:
Amount = 240
Radius = 0.8
Threshold = 1.0
Luminance = 0
Color = 0
Details = 0
Sometimes I push Details to 10-15 for a little more content but it seems to introduce artifacts rather quickly with this sensor.
If you are an X-Trans sensor user, what adjustments do you find helpful and why?
Jeff
0
Post is closed for comments.
Comments
0 comments