Wrong paper size in Print dialog

Comments

6 comments

  • Bartek. .

    Problem previously reported to service C1, unfortunately not solved to date :(

    https://support.captureone.com/hc/en-us/community/posts/360011504237-White-stripe-on-the-printout-?page=1#community_comment_360002943777

     

     

     

    0
    Comment actions Permalink
  • Patrick Eisen

    Any update?

    I did not here anything back since a while.

    0
    Comment actions Permalink
  • SFA

    Mike,

    Does the printer driver have a restriction about edge to edge printing that is paper type dependent?

    I took a look at the user guide and it seems to suggest it does but the guide appeared to be a US centric document that mentioned A3 but not A4 paper sizes.

    I know that some printers over the years have enforced limits on edge to edge on the basis that there overspray problem can become significant in some cases and therefore the option is constrained. The Guide I looked at hinted at such a possibility but was not offering further guidance on the pages I read.

    0
    Comment actions Permalink
  • Patrick Eisen

    This worked at the beginning of C1 20.
    It is broken since two updates

     

    0
    Comment actions Permalink
  • nigel read

    When printing using a Canon Pixma printer, the cell sizes on the prints for both custom and standard templates do not match that designated on the Capture One print dialogue.

    I have previously notified this to C1 Support, who responded that it was a problem with C1 software, but nothing has changed in 3 months.

    0
    Comment actions Permalink
  • Bartek. .

    my similar paper size issue mentioned above  https://support.captureone.com/hc/en-us/community/posts/360011504237-White-stripe-on-the-printout-?page=1#community_comment_360002943777    was fixed a few days ago in the latest update 13.1.2.35

    0
    Comment actions Permalink

Please sign in to leave a comment.