Phase one H10
Hola!
tengo un respaldo Phase One H10-H11, firmware version 1.0.4 con puerto firewire 400. Hasta ahora funcionaba con un imac con 10.7 y Capture one 3.4.9.
Ahora he comprado un imac M1 y no consigo que funcione- He comprado los tres adaptadores:
- firewire 400 -> firewire 800
- Firefire 800 -> Thunderbolt 2 (mini DisplayPort)
- Thunderbolt 2 -> Thunderbolt 3 (USB-C)
La camara la reconoce el sistema y he logrado que dispare, pero no manda la imagen desde la cámara al Capture one
He probado las versiones:
- Capture One Pro 22 15.0.1.8 -> no reconoce la camara
- Capture One 20 Pro 13.1.3.9 -> reconoce la camara pero al disparar no guarda la imagen
- Capture One Pro 12.1.4.24 -> reconoce la camara pero al disparar no guarda la imagen
Necesito ayuda, gracias.
------
Hello!
I have a Phase One H10-H11firmware version 1.0.4 with a firewire 400 port. Until now it worked with an imac running 10.7 and Capture one 3.4.9.
Now I have bought an imac M1 and I can't get it to work- I have bought all three adapters:
- firewire 400 -> firewire 800
- Firefire 800 -> Thunderbolt 2 (mini DisplayPort)
- Thunderbolt 2 -> Thunderbolt 3 (USB-C)
The camera is recognized by the system and I have managed to get it to shoot, but it does not send the image from the camera to Capture one
I have tried the versions:
- Capture One Pro 22 15.0.1.8 -> does not recognize the camera
- Capture One 20 Pro 13.1.3.9 -> recognizes the camera but when shooting it does not save the image
- Capture One Pro 12.1.4.24 -> recognizes the camera but when shooting does not save the image
-
Not so many users here with Phase One cameras. Try to contact Capture One staff:
0 -
Hi
I would strongly recommend to contact Phase One support instead.
0
Post is closed for comments.
Comments
2 comments