Panasonic LX10/LX15 lens correction profile seems to be wrong

Comments

6 comments

  • gb

    Make sure the C1 distortion slider is at 100 (%).

    Even with the manufacturer profile the correction will often not be applied by default, ie slider at 0.

    1
    Comment actions Permalink
  • Petr Vones

    Yes, it is at 100%.

    0
    Comment actions Permalink
  • gb

    Is there any room in the distortion slider to further correct?

    0
    Comment actions Permalink
  • Petr Vones

    Yes, I can manually correct it by moving the slider to around 75 percent, but this is NOT what I expect from the camera dedicated profile. Especially when it works fine in the bundled SILKYPIX software.

    Here you can download both RAW and out of camera JPEG to see the issue.

    0
    Comment actions Permalink
  • Petr Vones

    This is how it looks in the SILKYPIX software. It is properly corrected even with the slider at the "100%" default position, no additional manual correction required. I just expected the same behavior in the Capture One software, that's all.

    0
    Comment actions Permalink
  • gb

    Downloaded the RAW and agree 75 is about right.
    Only thing you really can do is submit a support request about it.
    https://support.captureone.com/hc/en-us/requests/new
    Don't like your chances of it getting corrected very quickly though.

    1
    Comment actions Permalink

Please sign in to leave a comment.