Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

CO-22 Will Not Stich Files

Permanently deleted user

Hi,

I have downloaded the latest version of CO-22 for Fuji. I was able to stitch one set of Files to a panorama, now when I attempt to stitch other files, all Fuji,  it gets almost to the end of the process then fails with the statement, " Unable to Stich your Files" all the files were prepared on a Tripod specifically with Panos in mind. Has any one else experienced this? If this is the norm I for one will be going back to Lightroom which stiches all of these files with no problem.

0

Comments

10 comments

Date Votes
  • SFA

    How many files and how big would the result be?

    0
  • BeO
    Top Commenter

    It might be the norm if the conditions mentioned in the release notes are not fulfilled, so if your requirements typically fall outside these boundaries then you'd be better off with another stitching program or LR.

    Otherwise it might be a bug and submitting a request (link above) would be a good idea.

    0
  • SFA

    It occurs to me that for some of the Fuji cameras it might not require many files to be selected before the process would result in something that would exceed one or more of the conditions. 

    0
  • Permanently deleted user

    The files I attempted to Stich were well within the limits as stated by the release notes. As I said it stitched the first batch of 4 files no problem at all, then suddenly the failed messages appeared. I think I will send a request message as suggested and see how we get on.

    0
  • BeO
    Top Commenter

    Ah, maybe more memory needed to demosaic the x-trans pattern?

    0
  • BeO
    Top Commenter

    Peter, is this with all projections?

    0
  • SFA

    Peter,

    You did not mention a successful 4 file batch. 

    Was there anything different about the subsequent batches? Did you have a problem if you re-processed the original 4 files?

    0
  • Permanently deleted user

    I attempted to re-stitch the original 4 file batch that the software originally stitched, but they would not re-stich the second time around. I have attempted to stich several combinations of Fuji files, but the same failed message now appears. My Fuji Camera is the GFX 50s so I was very aware of the potential issues with file size, I downsized the files in the percentage tick box when it appears halfway through the stitching process, but still to no avail.

    0
  • Permanently deleted user

    Okay, 

    It looks as if there is an issue Stitching GFX Files. I have just managed to stitch a couple of Panoramics with some of my XT2 files. I need to dig deeper into this and see if I can figure out what is going on. I do not want to go back to Lightroom, but if CO-22 does not like GFX files I may not have any choice.

    0
  • Permanently deleted user
    • Edited

    I was stitching 12 photos from GFX100s, images for 1:1 printing of a 1.5m x 1.5m product.  Pano head used, nodal point identified, files transferred direct to a MBPro 14inch (maxed out spec).  Latest version of C1 Pro used.  When using Panini - got message "the size of your pano stitch is too large - 100% showed 1288MP"{,  but when using Perspective - had message "C1 unable to create pano stitch preview".

    I think used my Session on a 2017 imac pro 10 cores, 32 Ram, which is less powerful than my M1Max MBPro 14.   Interested my Imac Pro was able to stitch the same file in Perspective.

    I was also able to stitch the 12 files in PS cc on my ImacPro.

    Am surprised if it is related to my laptop which is 2022 and 64Ram, M1Max.  

     

     

     

    0

Post is closed for comments.