Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

scrap metal

Comments

6 comments

  • Permanently deleted user
    Top Commenter

    Nobody cares about your opinions, Richard - hard to take them seriously when you can't even post in the correct format or the correct forum.

    0
  • Richard Menzel
    In welchem ​​Format oder Forum soll ich es posten?
    Ich bin sehr verärgert und das aus gutem Grund! Ich habe CaptuerOne mehr als 3000 Studenten empfohlen, ich benutze es seit 14 Jahren fast täglich. Anfängliche Fehler sind bis heute nicht behoben und es wird nur teuer. Nach dem neusten Update gibt es immer wieder Fehler, es ist einfach Schrott.
    0
  • Richard Menzel
    Keith R

    in what position do you work for PhaseOne?

    0
  • Richard Menzel

    RAW zu JPG

    0
  • Permanently deleted user
    Top Commenter

    Jesus, what a mess this post is.

    in what position do you work for PhaseOne?

    I'm a user, not staff. You would know - if you'd put any effort into it before complaining - that this is a user-to-user forum.

    You would also know - again, if you'd put any effort into it before complaining - that Capture One software is nothing to do with Phase One as a company: the software company split off from the camera manufacturer years ago.

    Finally - and in the same spirit as the two comments above - this link is at the top of every single page on the forum:

    https://support.captureone.com/hc/en-us/requests/new

    So instead of uselessly whining on here about your problems - and assuming they relate to the software and not another company's cameras - you could actually do something useful and talk to Capture One.

    You're a teacher? Seriously?

    George Bernard Shaw was apparently right.

    0
  • Richard Menzel
    Hello Keith R
    First of all: English is not my mother tongue.
    My apologies for my bad tone, I had too much wine at work.
    And thank you for taking the time to reply to me.
    My frustration with the system has its history:
    I've been working with CaptureOne since 2006 because of PhaseOne.
    It used to be free, now it's very expensive. To date,
    there are the same errors in the program, which have never been fixed.
    They appear and disappear again. That's annoying. Comment on how this
    post came about: In the last two years I have lost over 70,000 euros.
    No photo training and no trade fairs. There has also been a decline
    in advertising photography. Many fellow photographers out there are
    even worse off. They live on alms. Exactly during this time, CaptureOne
    increases the annual fee by 40%. If only it would run more reliably then.
    The post came about when every 10th JPG image was destroyed during rendering.
    It used to happen more often, it was almost good for a while, and it's back
    with the 22Pro version. Ever since CaptureOne broke up with OhaseOne, they've
    been ramping up costs, constantly implementing new stuff, rather than fixing
    the base of the system. This is my very personal experience.
    0

Post is closed for comments.