Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

R6 tether with SD cards in camera

Permanently deleted user

Had some troubles recently shooting recently on Canon R6 with latest firmware, C1-23 on M1 Max 16" laptop.  Ideally i'd like to shoot tethered and to the SD card simultaneously, which works with a clean SD card, but as more images are added to the card, it causes C1 to crash and then the camera wont appear in C1. The only way I can shoot tethered in a real world scenario is to remove the SD cards. On a recent job this was a real pain as we were with kids and had to sometimes move with them from set to off set without stopping. I cant see any info on this, not sure if its just me or if this is a known issue?

1

Comments

2 comments

Date Votes
  • Permanently deleted user

    So, we take 2 flash drives, thanks to the two ports under them for this. We put a separate recording on the camera, on cd1 - in the catalog capture one, SD2 - raw. When linking the camera to C1, we choose to work with SD1 immediately in the program, in the camera it is necessary to select recording to sd2

    0
  • Mo

    Hello, I\ve faced the same issue with Canon R6mark2 and R10. if the memory card is a filled with photos, like 30% of the entire capacity or so, Capture One refuses to tether. Ive formated the SD card, and not it works fine. but this is not practical. is this a known issue with C1?

    0

Post is closed for comments.