Bill_H
- Actividad total 26
- Última actividad
- Miembro desde
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Votos 0
- Suscripciones 8
Resumen de la actividad
Última actividad de Bill_H-
Bill_H hizo un comentario,
Did you get a chance to see the video? It is more a 'walk-through of the functionality' and may be what you are seeking.
-
Bill_H creó una publicación,
What's REALLY most important ...
Reading the forum I see many people complaining about many things, and I agree that things like the interface changes, the cache location, even removing the mouse-scrolling are disappointing. I've...
-
Bill_H hizo un comentario,
Tom, I just went thru a full support case cycle and right now it is taking them a while to respond so probably you just have to be patient (I'm sure that's not what you want to hear).For specifics,...
-
Bill_H hizo un comentario,
lpcd2001, C1 3.7.7 works with the 1D M III except for these two things: 1) the High Tone Priority custom function is not recognized, and 2) there's a small strip of garbage pixels left at the botto...
-
Bill_H hizo un comentario,
John Malloy wrote: "Hey, Bill....I'm gonna be testing Highlight priority soon....can you confirm wether Adobe accommodates HP"Yes, ACR interprets the custom function correctly and the exposure is r...
-
Bill_H hizo un comentario,
Just to update this in case other 1D Mark III users have this problem, apparently the problem occurs if you set Custom Function II-3 (Highlight Tone Priority) since COne doesn't recognize this CF a...
-
Bill_H hizo un comentario,
banzai, in re-reading this thread I see you had suggested it might be this CF in your first post and I should have tested this after your post, so you deserve credit for figuring it out too.I sent ...
-
Bill_H hizo un comentario,
John, you solved it! Thanks, I'll fill out an updated support case and send it to Capture One, they will be thrilled to know the 'solution'.I just re-shot the grey-card/white-card again and with t...
-
Bill_H hizo un comentario,
We are using both 3.7.7 and 4.0 and there are no problems.
-
Bill_H hizo un comentario,
I'm getting the same message ... is this a problem on my end (say my firewall settings or something like that) or is Phase One just overloaded for a bit?Anyone know?