Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Sony a7r IV tether problem

Permanently deleted user
I'm having trouble tethering with a Sony a7r IV on a MacBook Pro(2019) I'm running Capture One Pro 13.0.1.19. I can tether fine with a PhaseOne XF IQ4. I'm not sure if I need to change something on my Sony Camera. Here are somethings I've tried:
Sony camera is set to PC Remote via USB, Updated my camera to 1.10 Firmware, Anti-flicker is turned off. I've Tried a USB-C cable and Micro-USB. Any tips would be appreciated.

Thanks,
Peter
0

Comments

4 comments

Date Votes
  • SFA
    From your post I am guessing you have already see this Tech Support article but if not might it offer some ideas?

    https://support.captureone.com/hc/en-us/articles/360003494138-Live-view-and-tethering-problems-with-Sony-A7R-IV

    Grant
    0
  • Paul Steunebrink
    In Capture One Pro, check in Preferences, Capture tab the providers. Make sure Sony is checked.
    -1
  • Permanently deleted user
    Thanks for the link, I had done almost everything listed. The one thing I didn't try was the Terminal reset, that did the trick. Now everything is working.

    In instances where you may have rejected these requests or selected 'Don't Allow' - you can run the commands below in Terminal to reset the permissions, so that you are prompted to grant access again.

    tccutil reset SystemPolicyRemovableVolumes com.phaseone.captureone13
    tccutil reset Photos com.phaseone.captureone13
    -1
  • SFA
    Peter72 wrote:
    Thanks for the link, I had done almost everything listed. The one thing I didn't try was the Terminal reset, that did the trick. Now everything is working.

    In instances where you may have rejected these requests or selected 'Don't Allow' - you can run the commands below in Terminal to reset the permissions, so that you are prompted to grant access again.

    tccutil reset SystemPolicyRemovableVolumes com.phaseone.captureone13
    tccutil reset Photos com.phaseone.captureone13


    That's good to hear.

    Glad you have it working now.

    Grant
    0

Post is closed for comments.