Skip to main content

⚠️ Please note that this topic or post has been archived. The information contained here may no longer be accurate or up-to-date. ⚠️

Renaming files crashes C1Pro

Dave241
I installed C1pro without any problems but I can't get any further 🤬

When I load a session I do three things before even starting to process the images
1) Make sure they are sorted by date
2) Add my copyright
3) Rename all of the files

1 and 2 work fine but as soon as I try to rename all of the files C1 crashes after renaming the second file 😐

Any suggestions greatly welcomed.

Dave
0

Comments

34 comments

Date Votes
  • Dave241
    [quote="Dave241" wrote:
    I installed C1pro without any problems but I can't get any further 🤬

    When I load a session I do three things before even starting to process the images
    1) Make sure they are sorted by date
    2) Add my copyright
    3) Rename all of the files

    1 and 2 work fine but as soon as I try to rename all of the files C1 crashes after renaming the second file 😐

    Any suggestions greatly welcomed.

    Anyone?

    Dave
    0
  • Steven48
    Open a support case.
    0
  • Steven48
    Oh, and keep us posted. 😊
    0
  • Dave241
    [quote="Steven48" wrote:
    Open a support case.


    Hi Steve,
    No, I don't think so, as from v3.7 onwards I have felt like a bit of a beta tester for Phase One 🤓

    From version 5 onwards the bugs have been getting progressively worse and from reading the posts here it look like v7 is going to be the buggiest release yet 🤭

    I have used C1 from the beginning and I do very much like the look of the converted files, I personally don't think v7 is ready for prime time.
    0
  • Steven48
    [quote="Dave241" wrote:

    Hi Steve,
    No, I don't think so, as from v3.7 onwards I have felt like a bit of a beta tester for Phase One 🤓

    From version 5 onwards the bugs have been getting progressively worse and from reading the posts here it look like v7 is going to be the buggiest release yet 🤭

    I have used C1 from the beginning and I do very much like the look of the converted files, I personally don't think v7 is ready for prime time.

    I completely understand. I haven't been using there products for very long but run into a few glitches and read about all the pain that some people are having. It's a shame too, C1 has so much potential. Maybe PO should think about adding some more prerelease testers to squash a lot more of the bugs before releasing a new version.
    0
  • H. Cremers
    [quote="Dave241" wrote:
    I installed C1pro without any problems but I can't get any further 🤬
    ...
    Any suggestions greatly welcomed.

    Dave


    Do these things in a different sequence, rename first before doing anything else.

    And, since this is a user-to-user forum, it's appreciated to update all of us on the findings.
    0
  • Dave241
    [quote="HCS" wrote:
    [quote="Dave241" wrote:
    I installed C1pro without any problems but I can't get any further 🤬
    ...
    Any suggestions greatly welcomed.

    Dave


    Do these things in a different sequence, rename first before doing anything else.

    And, since this is a user-to-user forum, it's appreciated to update all of us on the findings.


    I have deleted the session and started from scratch, I tried renaming the files first but it still crashes C1 every time I try.
    I can convert the raws, rename single files etc: without it crashing but as soon as I try to batch rename it crashes instantly.

    To me batch renaming is a basic feature and in the past it has caused C1 to get quite slow but it's never crashed like this before.

    I really don't know what to try next ❓
    0
  • Steven48
    Have tried setting your preferences to never for open cl?
    0
  • Dave241
    [quote="Steven48" wrote:
    Have tried setting your preferences to never for open cl?


    Hi Steve, that's the first thing I tried,no luck sadly 😕
    0
  • rap_digital
    Where are your sessions and files stored? Are the files in a session favorite?
    0
  • Coach
    This has helped me in the past: Let CO create all the previews/initial settings, then exit the program. Restart and do your renaming, and again exit the program. Restart again and do your edits. Drink lots of coffee.
    0
  • Dave241
    [quote="rap_digital" wrote:
    Where are your sessions and files stored? Are the files in a session favorite?


    Hi Rick, they are both stored on my iMac's hard drive and yes they are in a session favorite.
    0
  • Dave241
    [quote="Coach" wrote:
    This has helped me in the past: Let CO create all the previews/initial settings, then exit the program. Restart and do your renaming, and again exit the program. Restart again and do your edits. Drink lots of coffee.


    Hi coach, I have tried this, I went even further though and deleted everything,all session and raw files ,in fact everything relating to v7 🤓
    I then copied the raw files back to my hard drive again and let v7 do it's thing again, sadly it still crashes on batch renaming ❓

    Drink lot's of coffee you say, I'm on the hard stuff already 😄
    0
  • rap_digital
    Move the files to the Shared user folder and rename the Capture One folder in application Support folder. This forces C1 to reset workspaces keyboardshortcuts and recipes etc.
    0
  • bwinter
    Got the same problem here, when I try a batch rename, it crashes.....

    C1 7 on Mountain Lion
    0
  • Dave241
    [quote="bwinter" wrote:
    Got the same problem here, when I try a batch rename, it crashes.....

    C1 7 on Mountain Lion


    Well, at least I'm not alone 😂
    0
  • bwinter
    Yeah, it's quite a shame, such a great quality in image processing and such stupid bugs 🙄
    0
  • bwinter
    BTW: Open CL is disabled, makes no change

    Deleted the C7 plist file -> working again, very strange
    0
  • Dave241
    [quote="bwinter" wrote:
    BTW: Open CL is disabled, makes no change

    Deleted the C7 plist file -> working again, very strange


    Are you saying that when you delete the plist file you can batch rename ❓
    0
  • bwinter
    Yes, that's right, I deleted the plist file, starte C1 again, of course I had to do my settings again like disable Open CL etc. and after that I imported a couple of pictures and was able to do the rename process....
    0
  • Dave241
    Wow, I hope it works for me, I will try it when I get home tonight.
    Thanks for the tip.
    0
  • bwinter
    Ok, I tried again, but now it failed. It seems to work only after the first start after the plist file has been deleted,
    so thumbs down for my solution.....
    0
  • Dave241
    Thanks anyway, I hope someone comes up with a solution to this batch renaming problem, P1 you listening 😂
    0
  • Dave241
    I have managed to rename my raw files, well sort of 😕

    After much farting around deleting just about everything ie plist, sessions, cos files etc, reinstalling v7 twice! I have managed to batch rename the raw files 🤓

    How you ask, well, I created a new session file with a different name (using the same session name did not work ❓ ) I then selected all files, set the rename counter to 1 and ran the batch rename process, to my joy, and amazement ❗️ C7 started renaming them without crashing.

    This took a couple of minutes and when finishes my files were all renamed 😄 140 files all renamed without error? no, don't be silly 😁

    There were 140 raw files and yes, all were renamed BUT, in increments of 3 😭 it renames the first file correctly ie "filename 0001" then it renames the second one "filename 0004"? and from there on it renames them in increments of 3
    so they are batch renamed "filename 0001,4,7,10,13,16,19 and so on?

    Still better then crashing eh, I have tried renaming three times and it works like this every time 😄
    0
  • Edward Caruso
    [quote="Dave241" wrote:

    There were 140 raw files and yes, all were renamed BUT, in increments of 3 😭 it renames the first file correctly ie "filename 0001" then it renames the second one "filename 0004"? and from there on it renames them in increments of 3
    so they are batch renamed "filename 0001,4,7,10,13,16,19 and so on?
    Still better then crashing eh, I have tried renaming three times and it works like this every time 😄


    I haven't used V7 all that much - just process a few images here and there (don't see a difference yet)
    but if it is truly messing up the batch rename like that - that is pretty funny. I really wonder about the beta testing.
    0
  • NNN634271965217380703
    I renamed one file and now the program crashes every time I try to use it. Program is now useless.
    0
  • Coach
    First see if the settings and previews were renamed properly.

    Try deleting the setting file .cos and perhaps the preview. Hopefully that will let you start over with it.
    0
  • Rick142
    I want to use version7 so I ended up importing and renaming in ver.6 and then opening in 7. I hope this is one of the first things to be fixed.

    BTW, it is easy to see that it was rushed out the door probably for the NY Photoshow. I am running it in trial mode but the trial mode window is overridden by the application trying to open files and half the time I am desperately clicking on the trial radio button with no result.
    0
  • NN123120UL8
    same problem here.

    capture one is useless with bugs like this.
    I need to use "a better rename" to rename my raws.



    system: mac os 10.8.2.
    capture one 7
    0
  • Rick142
    I'm actually trying to use Version 7 as much as possible because I like it so much. As long as I work around the renaming issue and deal with the odd crash or two, I can handle it because I love the new HDR sliders compared to previous versions.
    0

Post is closed for comments.