Fujifilm Film Simulations - transfer/use of customized parameters

Andreas Reichert

• November 10, 2021 08:53

Hi!

I'm using customized film simulations with my Fujifilm X-Pro2 JPGs, e.g. Classic Chrome, NR -2, H+1, Color+2 and Sharp +1. 

After importing both JPG and RAW into C1 there is no difference between the JPG and the RAW file. I conclude that the customized parameters are also used by C1 within the auto curve.

But if I customize the white balance in the camera, e.g. R: -3, B: 4 this won't effect the RAW in C1.

Now I'm wondering which camera parameters for the film simulations are transferred into C1/RAWs.

Is there any official information?

Thanks! 

0

• 

  April

  • November 10, 2021 15:24

  Please see: https://support.captureone.com/hc/en-us/articles/360002589937-Fujifilm-Film-Simulations

  0
• 

  Andreas Reichert

  • November 10, 2021 15:48

  Thanks, but I've already found this article, which is only about using the base film simulation curves.

  Unfortunately there's no information about customized film simulations, which is a great feature of Fujifilm cameras. As I wrote, I noticed that some customized parameters are used by C1 to adapt the basic simulations curves, but some parameters, like the shifted white balance, are not applied to the RAW.

  So again the question: Which film simulation parameters from the camera settings are used by C1 for the RAW files?

  0

Post is closed for comments.