NN206299UL
- Total activity 18
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 8
Activity overview
Latest activity by NN206299UL-
NN206299UL commented,
Check that Image Capture in the OS isn't blocking C1 from connecting. Go to Applications>Image Capture and then (with the camera connected) click on the tiny tiny tiny little arrow that looks like ...
-
NN206299UL commented,
Ok so, Today on a shoot (knowing full well that everything is working fine) we were shooting with a D800 to a late 2013 macbook pro using the right side USB. The software we were using was lightroo...
-
NN206299UL commented,
Just wondering - how are you powering the back? if you switch it to battery only instead of auto detect is there a difference?
-
NN206299UL commented,
Sounds like a corrupt catalogue to me - have you tried starting it up whilst holding alt? This will give you the option of starting a new catalogue or session before the application opens. then at ...
-
NN206299UL commented,
I think this is where the treasured, but so often overlooked XMP files comes in to good use - if you are likely to be royally screwed by a corrupt catalogue then make sure you check the box in the ...
-
NN206299UL commented,
Had a similar problem, I think it's another apple product power issue. The camera would not tether with my usual cables but WOULD with a tiny hard drive Usb 3 cable. eventually got it going with a ...
-
NN206299UL commented,
I am running a new Mac book pro with Mavericks and have not had a problem with 7.1.5 - it was actually a pretty smooth ride.This was with a 5d mk3 - the 'Canon bug' had gone and I was able to unplu...
-
NN206299UL commented,
So, just to clarify - are you linking 2 cables together (a nikon cable and a longer cable)? Have you tested the camera just using one cable straight to the computer (minimising points of failure)?A...
-
NN206299UL commented,
Just out of interest, how long are the cables that you're using?
-
NN206299UL commented,
Just to ask a stupid question but I'm assuming that you've tried other cables? I had a faulty cable that caused similar issues (blank pending bar, stuck shots which then cause the software to crash...