After the creation of the LCC reference image and the associated LCC profile, you must apply the correction data to your images. To speed up your workflow, the correction data is applied between the LCC reference image and the image or images to be corrected.
If you have captured the characterization image with the intent to use it to perform general lens correction, consider saving the LCC reference image as an LCC Preset.
- Capture One can detect whether a LCC reference image should be applied to the image next to it in the Browser. If they are not adjacent to each other, select the relevant LCC reference image (i.e., the thumbnail labeled LCC), as well as the corresponding image to be corrected. A single LCC reference image can be applied simultaneously to multiple images if those were captured under the same conditions and with identical settings as the LCC reference image.
- In the LCC tool, click on the Action menu and select Apply LCC options.
Alternatively, in the main menu, select Adjustments -> Apply LCC.
- The correction adjustments from the profile and any subsequent adjustments of the LCC reference image are applied to the selected image or images and visible in the Viewer.