Shooting remotely from Capture Pilot (Camera Control) using a Phase One system camera

The Camera Control option is automatically available in Capture Pilot when connected to a Phase One XF IQ3 100/50MP or 645DF+ camera with IQ2 series digital back. This allows both completely wireless remote control using an ad hoc (computer-to-computer) connection as well as the option to operate the camera wirelessly from the app when the camera is tethered to a Wi-Fi-enabled computer running Capture One Pro. 

The Alpa A-series system cameras do not support remote operation due to their mechanical operation.

For a nominal fee, Camera Control is available as an in-app purchase for other supported Phase One, Leaf, Canon, and Nikon models. Supported cameras can only be operated wirelessly from Capture Pilot when tethered to a computer running Capture One Pro.

1. Press the Camera icon in the bottom left corner of the Capture Pilot display on an iOS device. The Camera Control dialog window will open.
2. Long press the aperture, shutter or ISO values to access a menu list of alternative settings. Exposure settings can also be altered by swiping the (virtual) dial which is located next to the numeric settings.
3. Press the Shutter button to trigger the shutter and expose an image. If the camera is tethered, files are saved to a designated Capture One folder on your computer. RAW files are not stored on the iOS device.

<<   Live View using a Phase One IQ3 100/50MP or IQ250 digital back   |   Setup a direct (ad-hoc) connection with an Alpa A-series system camera   >>